Share
Functional Reactive Programming in the Netflix API - LambdaJam 2013
Presented at LambdaJam 2013 in Chicago
http://lambdajam.com/sessions#christensen
The Netflix API receives over two billion requests a day from more than 800 different devices ranging from gaming consoles like the PS3, XBox and Wii to set-top boxes, TVs and mobile devices such as Android and iOS.
As the unique demands of different devices have have diverged it became clear that the API needed to allow optimizing client-server interaction (http://techblog.netflix.com/2013/01/optimizing-netflix-api.html). We achieve this by enabling the creation of customized service endpoints that reduce network chatter, leverage server-side processing power and decentralize the development of each endpoint so as to encourage and empower rapid innovation.
This presentation will describe how the Netflix API achieves these goals using functional reactive programming using RxJava in a polyglot Java stack. Highly concurrent service endpoints are implemented without blocking, synchronization or thread-safety concerns by using declarative functional reactive composition. Parallelism and resiliency are enabled by the underlying Hystrix fault tolerance isolation layer that fronts the dozens of distributed systems within the Netflix SOA.
Ben Christensen
Transcript
142 slides
-
Functional Reactive Programming in the Netflix API Ben Christensen Software
Engineer – API Platform at Netflix @benjchristensen http://www.linkedin.com/in/benjchristensen http://techblog.netflix.com/ LambdaJam – July 2013 Function Reactive 1 -
Function Reactive composableFunctions Applied Reactively 2 This presentation is about
how the Netflix API application applies a functional programming style in an imperative Java application to apply functions reactively to asynchronously retrieved data ... -
Function Reactive composableFunctions Applied Reactively 4 ... combine and output
web service responses. -
Function Reactive FunctionAL Lambdas Closures (mostly) Pure Composable Asynchronous Push
Events Values 5 We have been calling this approach “functional reactive” since we use functions (lambdas/closures) in a reactive (asynchronous/push) manner. -
Function Reactive FunctionAL Lambdas Closures (mostly) Pure Composable Semi- ?
Asynchronous Push Events Values 6 But there is prior art for “Functional Reactive Programming” (FRP) from languages such as Fran that defines FRP in a more restricted sense (for example denotative and continuous time) so maybe what we’re doing here is “semi-functional reactive”? Not sure what to call it but we are “applying functions reactively to asynchronous sequences of data”. -
Observable.toObservable("one", "two", "three") .take(2)
.subscribe((arg) -‐> { System.out.println(arg); }); Java8 Observable.toObservable("one", "two", "three") .take(2) .subscribe((arg: String) => { println(arg) }) Scala (-‐> (Observable/toObservable ["one" "two" "three"]) (.take 2) (.subscribe (fn [arg] (println arg)))) Clojure Observable.toObservable("one", "two", "three") .take(2) .subscribe({arg -‐> println(arg)}) Groovy Observable.toObservable("one", "two", "three") .take(2) .subscribe(lambda { |arg| puts arg }) JRuby 7 Simple examples showing RxJava code in the 5 languages supported as of RxJava 0.9 (https://github.com/Netflix/RxJava/tree/master/language-adaptors). Java8 works with rxjava-core and does not need a language-adaptor. It also works with Java 6/7 but without lambdas/closures the code is more verbose. -
Observable.toObservable("one", "two", "three") .take(2)
.subscribe((arg) -‐> { System.out.println(arg); }); Observable.toObservable("one", "two", "three") .take(2) .subscribe((arg: String) => { println(arg) }) Scala (-‐> (Observable/toObservable ["one" "two" "three"]) (.take 2) (.subscribe (fn [arg] (println arg)))) Clojure Observable.toObservable("one", "two", "three") .take(2) .subscribe({arg -‐> println(arg)}) Groovy Observable.toObservable("one", "two", "three") .take(2) .subscribe(lambda { |arg| puts arg }) JRuby 8 Groovy is the language to be used for code examples in the rest of this presentation. -
“a library for composing asynchronous and event-based programs using observable
sequences for the Java VM” A Java port of Rx (Reactive Extensions) https://rx.codeplex.com (.Net and Javascript by Microsoft) RxJava http://github.com/Netflix/RxJava 9 RxJava is a port of Microsoft’s Rx (Reactive Extensions) to Java that attempts to be polyglot by targeting the JVM rather than just Java the language. -
10 Netflix is a subscription service for movies and TV
shows for $7.99USD/month (about the same converted price in each countries local currency). -
More than 36 million Subscribers in 50+ Countries and Territories
11 Netflix has over 36 million video streaming customers in 50+ countries and territories across North & South America, United Kingdom, Ireland, Netherlands and the Nordics. -
Netflix accounts for 33% of Peak Downstream Internet Traffic in
North America Netflix subscribers are watching more than 1 billion hours a month 12 Sandvine report available with free account at http://www.sandvine.com/news/global_broadband_trends.asp -
API traffic has grown from ~20 million/day in 2010 to
>2 billion/day 0 500 1000 1500 2000 2010 2011 2012 Today millions of API requests per day 13 -
Discovery Streaming 14 Streaming devices talk to 2 major edge
services: the first is the Netflix API that provides functionality related to discovering and browsing content while the second handles the playback of video streams. -
Netflix API Streaming 15 This presentation focuses on architectural choices
made for the “Discovery” portion of traffic that the Netflix API handles. -
16 The Netflix API powers the “Discovery” user experience on
the 800+ devices up until a user hits the play button at which point the “Streaming” edge service takes over. -
Netflix API Dependency A Dependency D Dependency G Dependency J
Dependency M Dependency P Dependency B Dependency E Dependency H Dependency K Dependency N Dependency Q Dependency C Dependency F Dependency I Dependency L Dependency O Dependency R 17 The Netflix API serves all streaming devices and acts as the broker between backend Netflix systems and the user interfaces running on the 800+ devices that support Netflix streaming. 2+ billion incoming calls per day are received which in turn fans out to several billion outgoing calls (averaging a ratio of 1:6) to dozens of underlying subsystems. -
/ps3/home Dependency F 10 Threads Dependency G 10 Threads Dependency
H 10 Threads Dependency I 5 Threads Dependency J 8 Threads Dependency A 10 Threads Dependency B 8 Threads Dependency C 10 Threads Dependency D 15 Threads Dependency E 5 Threads Dependency K 15 Threads Dependency L 4 Threads Dependency M 5 Threads Dependency N 10 Threads Dependency O 10 Threads Dependency P 10 Threads Dependency Q 8 Threads Dependency R 10 Threads Dependency S 8 Threads Dependency T 10 Threads /android/home /tv/home Functional Reactive Dynamic Endpoints Asynchronous Java API 18 -
/ps3/home Dependency F 10 Threads Dependency G 10 Threads Dependency
H 10 Threads Dependency I 5 Threads Dependency J 8 Threads Dependency A 10 Threads Dependency B 8 Threads Dependency C 10 Threads Dependency D 15 Threads Dependency E 5 Threads Dependency K 15 Threads Dependency L 4 Threads Dependency M 5 Threads Dependency N 10 Threads Dependency O 10 Threads Dependency P 10 Threads Dependency Q 8 Threads Dependency R 10 Threads Dependency S 8 Threads Dependency T 10 Threads /android/home /tv/home Functional Reactive Dynamic Endpoints Asynchronous Java API Hystrix fault-isolation layer 19 Backend communication to underlying services is isolated using Hystrix (https://github.com/Netflix/Hystrix) -
/ps3/home Dependency F 10 Threads Dependency G 10 Threads Dependency
H 10 Threads Dependency I 5 Threads Dependency J 8 Threads Dependency A 10 Threads Dependency B 8 Threads Dependency C 10 Threads Dependency D 15 Threads Dependency E 5 Threads Dependency K 15 Threads Dependency L 4 Threads Dependency M 5 Threads Dependency N 10 Threads Dependency O 10 Threads Dependency P 10 Threads Dependency Q 8 Threads Dependency R 10 Threads Dependency S 8 Threads Dependency T 10 Threads /android/home /tv/home Functional Reactive Dynamic Endpoints Asynchronous Java API 20 This presentation is going to focus on why the Netflix API team chose the functional reactive programming model (Rx in particular), how it is used and what benefits have been achieved. Other aspects of the Netflix API architecture can be found at http://techblog.netflix.com/search/label/api and https://speakerdeck.com/benjchristensen/. -
Discovery of Rx began with a re-architecture ... 21 More
information about the re-architecture can be found at http://techblog.netflix.com/2013/01/optimizing-netflix-api.html -
... that collapsed network traffic into coarse API calls ...
Nested, conditional, Concurrent execution 22 Within a single request we now must achieve at least the same level of concurrency as previously achieved by the parallel network requests and preferably better as we can leverage the power of server hardware, lower latency network communication and eliminate redundant calls performed per incoming request. -
... and we wanted to allow anybody to create endpoints,
not just the “API Team” 23 User interface client teams now build and deploy their own webservice endpoints on top of the API Platform instead of the “API Team” being the only ones who create endpoints. -
24 We wanted to retain flexibility to use whatever JVM
language we wanted as well as cater to the differing skills and backgrounds of engineers on different teams. Groovy was the first alternate language we deployed in production on top of Java. -
Concurrency without each engineer reading and re-reading this -> (awesome
book ... everybody isn’t going to - or should have to - read it though, that’s the point) 25 -
public Data getData(); What if the implementation needs to change
from synchronous to asynchronous? How should the client execute that method without blocking? spawn a thread? Owner of API should retain control of concurrency behavior. 27 -
public void getData(Callback<T> c); public Future<T> getData(); public Future<List<Future<T>>> getData();
What about ... ? public Data getData(); 28 -
Iterable pull Observable push T next() throws Exception returns; onNext(T)
onError(Exception) onCompleted() 29 Observable/Observer is the asynchronous dual to the synchronous Iterable/Iterator. More information about the duality of Iterable and Observable can be found at http://csl.stanford.edu/~christos/pldi2010.fit/meijer.duality.pdf and http://codebetter.com/ matthewpodwysocki/2009/11/03/introduction-to-the-reactive-framework-part-ii/ -
Iterable pull Observable push T next() throws Exception returns; onNext(T)
onError(Exception) onCompleted() // Iterable<String> // that contains 75 Strings getDataFromLocalMemory() .skip(10) .take(5) .map({ s -‐> return s + "_transformed"}) .forEach( { println "next => " + it}) // Observable<String> // that emits 75 Strings getDataFromNetwork() .skip(10) .take(5) .map({ s -‐> return s + "_transformed"}) .subscribe( { println "onNext => " + it}) 30 The same way higher-order functions can be applied to an Iterable they can be applied to an Observable. -
Iterable pull Observable push T next() throws Exception returns; onNext(T)
onError(Exception) onCompleted() // Iterable<String> // that contains 75 Strings getDataFromLocalMemory() .skip(10) .take(5) .map({ s -‐> return s + "_transformed"}) .forEach( { println "onNext => " + it}) // Observable<String> // that emits 75 Strings getDataFromNetwork() .skip(10) .take(5) .map({ s -‐> return s + "_transformed"}) .subscribe( { println "onNext => " + it}) 31 -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() 32 Grid of synchronous and asynchronous duals for single and multi-valued responses. The Rx Observable is the dual of the synchronous Iterable. -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() String s = getData(args); if (s.equals(x)) { // do something } else { // do something else } 33 Typical synchronous scalar response with subsequent conditional logic. -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Iterable<String> values = getData(args); for (String s : values) { if (s.equals(x)) { // do something } else { // do something else } } 34 Similar to scalar value except conditional logic happens within a loop. -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Future<String> s = getData(args); if (s.get().equals(x)) { // do something } else { // do something else } 35 As we move to async a normal Java Future is asynchronous but to apply conditional logic requires dereferencing the value via ‘get()’. -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Future<String> s = getData(args); if (s.get().equals(x)) { // do something } else { // do something else } 36 And this leads to the typical issue in nested, conditional asynchronous code with Java Futures where asynchronous quickly becomes synchronous and blocking again. -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Future<String> s = getData(args); Futures.addCallback(s, new FutureCallback<String> { public void onSuccess(String s) { if (s.get().equals(x)) { // do something } else { // do something else } } public void onFailure(Throwable t) { // handle error } }, executor); 37 There are better Futures though, one of them is from Guava ... -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Future<String> s = getData(args); Futures.addCallback(s, new FutureCallback<String> { public void onSuccess(String s) { if (s.get().equals(x)) { // do something } else { // do something else } } public void onFailure(Throwable t) { // handle error } }, executor); 38 ... and it allows callbacks ... -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Future<String> s = getData(args); Futures.addCallback(s, new FutureCallback<String> { public void onSuccess(String s) { if (s.get().equals(x)) { // do something } else { // do something else } } public void onFailure(Throwable t) { // handle error } }, executor); 39 ... with onSuccess ... -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Future<String> s = getData(args); Futures.addCallback(s, new FutureCallback<String> { public void onSuccess(String s) { if (s.get().equals(x)) { // do something } else { // do something else } } public void onFailure(Throwable t) { // handle error } }, executor); 40 ... and onFailure handlers so the conditional logic can be put inside a callback and prevent us from blocking and we can chain calls together in these callbacks. -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Future<String> s = getData(args); s.map({ s -> if (s.get().equals(x)) { // do something } else { // do something else }); 41 Akka/Scala Futures are composable and provide higher-order functions ... -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Future<String> s = getData(args); s.map({ s -> if (s.get().equals(x)) { // do something } else { // do something else }); 42 ... that get us to where we want to be so that we can now compose conditional, nested data flows while remaining asynchronous. -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Future<String> s = getData(args); s.map({ s -> if (s.get().equals(x)) { // do something } else { // do something else }); 43 The composable Future ... -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Observable<String> s = getData(args); s.map({ s -> if (s.get().equals(x)) { // do something } else { // do something else }); 44 ... is very similar to the Rx Observable except that an Rx Observable supports multiple values which means it can handle a single value, a sequence of values or an infinite stream. -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Observable<String> s = getData(args); s.map({ s -> if (s.get().equals(x)) { // do something } else { // do something else }); 45 We wanted to be asynchronous to abstract away the underlying concurrency decisions and composable Futures or Rx Observables are good solutions. -
Single Multiple Sync T getData() Iterable<T> getData() Async Future<T> getData()
Observable<T> getData() Observable<String> s = getData(args); s.map({ s -> if (s.get().equals(x)) { // do something } else { // do something else }); 46 One reason we chose the Rx Observable is because it gives us a single abstraction that accommodates our needs for both single and multi-valued responses while giving us the higher- order functions to compose nested, conditional logic in a reactive manner. -
Instead of A blocking API ... class VideoService {
def VideoList getPersonalizedListOfMovies(userId); def VideoBookmark getBookmark(userId, videoId); def VideoRating getRating(userId, videoId); def VideoMetadata getMetadata(videoId); } class VideoService { def Observable<VideoList> getPersonalizedListOfMovies(userId); def Observable<VideoBookmark> getBookmark(userId, videoId); def Observable<VideoRating> getRating(userId, videoId); def Observable<VideoMetadata> getMetadata(videoId); } ... create An Observable API: 47 With Rx blocking APIs could be converted into Observable APIs and accomplish our architecture goals including abstracting away the control and implementation of concurrency and asynchronous execution. -
48 One of the other positives of Rx Observable was
that it is abstracted from the source of concurrency. It is not opinionated and allows the implementation to decide. For example, an Observable API could just use the calling thread to synchronously execute and respond. -
49 Or it could use a thread-pool to do the
work asynchronously and callback with that thread. -
50 Or it could use multiple threads, each thread calling
back via onNext(T) when the value is ready. -
51 Or it could use an actor pattern instead of
a thread-pool. -
53 Or a thread-pool/actor that does the work but then
performs the callback via an event-loop so the thread-pool/actor is tuned for IO and event-loop for CPU. All of these different implementation choices are possible without changing the signature of the method and without the calling code changing their behavior or how they interact with or compose responses. -
Client code treats all interactions with the API as asynchronous
The API implementation chooses whether something is blocking or non-blocking and what resources it uses. 54 -
Observable.create({ observer -‐>
try { observer.onNext(new Video(id)) observer.onCompleted(); } catch(Exception e) { observer.onError(e); } }) Observable<T> create(Func1<Observer<T>, Subscription> func) 55 Let’s look at how to create an Observable and what its contract is. An Observable receives an Observer and calls onNext 1 or more times and terminates by either calling onError or onCompleted once. More information is available at https://github.com/Netflix/RxJava/wiki/Observable -
Observable<T> create(Func1<Observer<T>, Subscription> func) Observable.create({ observer -‐>
try { observer.onNext(new Video(id)) observer.onCompleted(); } catch(Exception e) { observer.onError(e); } }) Observable 56 An Observable is created by passing a Func1 implementation... -
Observable<T> create(Func1<Observer<T>, Subscription> func) Observable.create({ observer -‐>
try { observer.onNext(new Video(id)) observer.onCompleted(); } catch(Exception e) { observer.onError(e); } }) Observer 57 ... that accepts an Observer ... -
Observable.create({ observer -‐>
try { observer.onNext(new Video(id)) observer.onCompleted(); } catch(Exception e) { observer.onError(e); } }) Observable<T> create(Func1<Observer<T>, Subscription> func) 58 ... and when executed (subscribed to) it emits data via ‘onNext’ ... -
Observable.create({ observer -‐>
try { observer.onNext(new Video(id)) observer.onCompleted(); } catch(Exception e) { observer.onError(e); } }) Observable<T> create(Func1<Observer<T>, Subscription> func) 59 ... and marks its terminal state by calling ‘onCompleted’ ... -
Observable.create({ observer -‐>
try { observer.onNext(new Video(id)) observer.onCompleted(); } catch(Exception e) { observer.onError(e); } }) Observable<T> create(Func1<Observer<T>, Subscription> func) 60 ... or ‘onError’ if a failure occurs. Either ‘onCompleted’ or ‘onError’ must be called to terminate an Observable and nothing can be called after the terminal state occurs. An infinite stream that never has a failure would never call either of these. -
def Observable<VideoRating> getRating(userId, videoId) {
// fetch the VideoRating for this user asynchronously return Observable.create({ observer -‐> executor.execute(new Runnable() { def void run() { try { VideoRating rating = ... do network call ... observer.onNext(rating) observer.onCompleted(); } catch(Exception e) { observer.onError(e); } } }) }) } Asynchronous Observable with Single Value 61 Example Observable implementation that executes asynchronously on a thread-pool and emits a single value. This explicitly shows an ‘executor’ being used to run this on a separate thread to illustrate how it is up to the Observable implementation to do as it wishes, but Rx always has Schedulers for typical scenarios of scheduling an Observable in a thread-pool or whatever a Scheduler implementation dictates. -
Synchronous Observable with Multiple Values def Observable<Video>
getVideos() { return Observable.create({ observer -‐> try { for(v in videos) { observer.onNext(v) } observer.onCompleted(); } catch(Exception e) { observer.onError(e); } }) } Caution: This is eager and will always emit all values regardless of subsequent operators such as take(10) 62 Example Observable implementation that executes synchronously and emits multiple values. Note that the for-loop as implemented here will always complete so should not have any IO in it and be of limited length otherwise it should be done with a lazy iterator implementation or performed asynchronously so it can be unsubscribed from. -
Asynchronous Observable with Multiple Values def Observable<Video> getVideos() {
return Observable.create({ observer -‐> executor.execute(new Runnable() { def void run() { try { for(id in videoIds) { Video v = ... do network call ... observer.onNext(v) } observer.onCompleted(); } catch(Exception e) { observer.onError(e); } } }) }) } 63 Example Observable implementation that executes asynchronously on a thread-pool and emits multiple values. Note that for brevity this code does not handle the subscription so will not unsubscribe even if asked. See the ‘getListOfLists' method in the following for an implementation with unsubscribe handled: https://github.com/Netflix/RxJava/blob/master/language-adaptors/rxjava-groovy/src/ examples/groovy/rx/lang/groovy/examples/VideoExample.groovy#L125 -
Asynchronous ObservER getVideos().subscribe(new Observer<Video>() {
def void onNext(Video video) { println("Video: " + video.videoId) } def void onError(Exception e) { println("Error") e.printStackTrace() } def void onCompleted() { println("Completed") } }) 64 Moving to the subscriber side of the relationship we see how an Observer looks. This implements the full interface for clarity of what the types and members are ... -
Asynchronous ObservER getVideos().subscribe( { video -‐>
println("Video: " + video.videoId) }, { exception -‐> println("Error") e.printStackTrace() }, { println("Completed") } ) 65 ... but generally the on* method implementations are passed in as functions/lambdas/closures similar to this. -
Asynchronous ObservER getVideos().subscribe( { video -‐>
println("Video: " + video.videoId) }, { exception -‐> println("Error") e.printStackTrace() } ) 66 Often the ‘onCompleted’ function is not needed. -
Function composableFunctions 67 The real power though is when we
start composing Observables together. -
Function composableFunctions Transform: map, flatmap, reduce, Scan ... Filter: take,
skip, sample, takewhile, filter ... Combine: concat, merge, zip, combinelatest, multicast, publish, cache, refcount ... Concurrency: observeon, subscribeon Error Handling: onErrorreturn, onErrorResume ... 68 This is a list of some of the higher-order functions that Rx supports. More can be found in the documentation (https://github.com/Netflix/RxJava/wiki) and many more from the original Rx.Net implementation have not yet been implemented in RxJava (but are all listed on the RxJava Github issues page tracking the progress). We will look at some of the important ones for combining and transforming data as well as handling errors asynchronously. -
Combining via Merge 69 The ‘merge’ operator is used to
combine multiple Observable sequences of the same type into a single Observable sequence with all data. The X represents an onError call that would terminate the sequence so once it occurs the merged Observable also ends. The ‘mergeDelayError’ operator allows delaying the error until after all other values are successfully merged. -
Observable<SomeData> a = getDataA(); Observable<SomeData> b = getDataB(); Observable.merge(a, b)
.subscribe( { element -‐> println("data: " + element)}) 70 -
Observable<SomeData> a = getDataA(); Observable<SomeData> b = getDataB(); Observable.merge(a, b)
.subscribe( { element -‐> println("data: " + element)}) 71 Each of these Observables are of the same type... -
Observable<SomeData> a = getDataA(); Observable<SomeData> b = getDataB(); Observable.merge(a, b)
.subscribe( { element -‐> println("data: " + element)}) 72 ... and can be represented by these timelines ... -
Observable<SomeData> a = getDataA(); Observable<SomeData> b = getDataB(); Observable.merge(a, b)
.subscribe( { element -‐> println("data: " + element)}) 73 ... that we pass through the ‘merge’ operator ... -
Observable<SomeData> a = getDataA(); Observable<SomeData> b = getDataB(); Observable.merge(a, b)
.subscribe( { element -‐> println("data: " + element)}) 74 ... which looks like this in code ... -
Observable<SomeData> a = getDataA(); Observable<SomeData> b = getDataB(); Observable.merge(a, b)
.subscribe( { element -‐> println("data: " + element)}) 75 ... and emits a single Observable containing all of the onNext events plus the first terminal event (onError/onCompleted) from the source Observables ... -
Observable<SomeData> a = getDataA(); Observable<SomeData> b = getDataB(); Observable.merge(a, b)
.subscribe( { element -‐> println("data: " + element)}) 76 ... and these are then subscribed to as a single Observable. -
Combining via Zip 77 The ‘zip’ operator is used to
combine Observable sequences of different types. -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB(); Observable.zip(a, b,
{x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}) 78 -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB(); Observable.zip(a, b,
{x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}) 79 Here are 2 Observable sequences with different types ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB(); Observable.zip(a, b,
{x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}) 80 ... represented by 2 timelines with different shapes ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB(); Observable.zip(a, b,
{x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}) 81 ... that we pass through the zip operator that contains a provided function to apply to each set of values received. -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB(); Observable.zip(a, b,
{x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}) 82 The transformation function is passed into the zip operator ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB(); Observable.zip(a, b,
{x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}) 83 ... and in this case is simply taking x & y and combining them into a tuple or pair and then returning it. -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB(); Observable.zip(a, b,
{x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}) 84 The output of the transformation function given to the zip operator is emitted in a single Observable sequence ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB(); Observable.zip(a, b,
{x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}) 85 ... that gives us our pairs when we subscribe to it. -
Error Handling Observable<SomeData> a = getDataA(); Observable<String> b = getDataB();
Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}, { println("completed") }) 86 If an error occurs then the ‘onError’ handler passed into the ‘subscribe’ will be invoked... -
Error Handling Observable<SomeData> a = getDataA(); Observable<String> b = getDataB();
Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}, { println("completed") }) onNext(T) onError(Exception) onCompleted() 87 -
Error Handling Observable<SomeData> a = getDataA(); Observable<String> b = getDataB();
Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}, { println("completed") }) 88 ... but this is the final terminal state of the entire composition so we often want to move our error handling to more specific places. There are operators for that ... -
Error Handling 89 The ‘onErrorResumeNext’ operator allows intercepting an ‘onError’
and providing a new Observable to continue with. -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB()
Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}) 90 -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB()
.onErrorResumeNext(getFallbackForB()); Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}) 91 If we want to handle errors on Observable ‘b’ we can compose it with ‘onErrorResumeNext’ and pass in a function that when invoked returns another Observable that we will resume with if onError is called. -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB()
.onErrorResumeNext(getFallbackForB()); Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}) 92 So ‘b’ represents an Observable sequence ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB()
.onErrorResumeNext(getFallbackForB()); Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}) 93 ... that emits 3 values ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB()
.onErrorResumeNext(getFallbackForB()); Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}) 94 ... and then fails and calls onError ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB()
.onErrorResumeNext(getFallbackForB()); Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}) 95 ... which being routed through ‘onErrorResumeNext’ ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB()
.onErrorResumeNext(getFallbackForB()); Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}) 96 ... triggers the invocation of ‘getFallbackForB()’ ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB()
.onErrorResumeNext(getFallbackForB()); Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}) 97 ... which provides a new Observable that is subscribed to in place of the original Observable ‘b’ ... -
Observable<SomeData> a = getDataA(); Observable<String> b = getDataB()
.onErrorResumeNext(getFallbackForB()); Observable.zip(a, b, {x, y -‐> [x, y]}) .subscribe( { pair -‐> println("a: " + pair[0] + " b: " + pair[1])}, { exception -‐> println("error occurred: " + exception.getMessage())}) 98 ... so the returned Observable emits a single sequence of 5 onNext calls and a successful onCompleted without an onError. -
100 ... except that it returns a specific value instead
of an Observable. Various ‘onError*’ operators can be found in the Javadoc: http://netflix.github.com/RxJava/javadoc/rx/Observable.html -
Netflix API Use Case 101 Now we’ll move to a
more involved example of how Rx is used in the Netflix API that demonstrates some of the power of Rx to handle nested asynchronous composition. -
102 This marble diagram represents what the code in subsequent
slides is doing when retrieving data and composing the functions. -
Observable<Video> emits n videos to onNext() 103 First we start
with a request to fetch videos asynchronously ... -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId) }
Observable<Video> emits n videos to onNext() 104 -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) } Takes first 10 then unsubscribes from origin. Returns Observable<Video> that emits 10 Videos. 105 -
Takes first 10 then unsubscribes from origin. Returns Observable<Video> that
emits 10 Videos. 106 The take operator subscribes to the Observable from VideoService.getVideos, accepts 10 onNext calls ... -
Takes first 10 then unsubscribes from origin. Returns Observable<Video> that
emits 10 Videos. 107 ... and then unsubscribes from the parent Observable so only 10 Video objects are emitted from the ‘take’ Observable. The parent Observable receives the unsubscribe call and can stop further processing, or if it incorrectly ignores the unsubscribe the ‘take’ operator will ignore any further data it receives. -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .map({ Video video -‐> // transform video object }) } The ‘map’ operator allows transforming the input value into a different output. 108 We now apply the ‘map’ operator to each of the 10 Video objects we will receive so we can transform from Video to something else. -
Observable<R> b = Observable<T>.map({ T t -‐>
R r = ... transform t ... return r; }) 109 The ‘map’ operator allows transforming from type T to type R. -
Observable<R> b = Observable<T>.map({ T t -‐>
R r = ... transform t ... return r; }) 110 The ‘map’ operator allows transforming from type T to type R. -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .map({ Video video -‐> // transform video object }) } The ‘map’ operator allows transforming the input value into a different output. 111 -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> // for each video we want to fetch metadata def m = video.getMetadata() .map({ Map<String, String> md -‐> // transform to the data and format we want return [title: md.get("title"), length: md.get("duration")] }) // and its rating and bookmark def b ... def r ... }) } We change to ‘mapMany’/‘flatMap’ which is like merge(map()) since we will return an Observable<T> instead of T. 112 But since we want to do nested asynchronous calls that will result in another Observable being returned we will use flatMap (also knows as mapMany or selectMany) which will flatten an Observable<Observable<T>> into Observable<T> as shown in the following marble diagram ... -
Observable<R> b = Observable<T>.mapMany({ T t -‐>
Observable<R> r = ... transform t ... return r; }) flatMap 113 The ‘flatMap’/‘mapMany’ operator allows transforming from type T to type Observable<R>. If ‘map’ were being used this would result in an Observable<Observable<R>> which is rarely what is wanted, so ‘flatMap’/‘mapMany’ flattens this via ‘merge’ back into Observable<R>. This is generally used instead of ‘map’ anytime nested work is being done that involves fetching and returning other Observables. -
Observable<R> b = Observable<T>.mapMany({ T t -‐>
Observable<R> r = ... transform t ... return r; }) flatMap 114 A single flattened Observable<R> is returned instead of Observable<Observable<R>> -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> // for each video we want to fetch metadata def m = video.getMetadata() .map({ Map<String, String> md -‐> // transform to the data and format we want return [title: md.get("title"), length: md.get("duration")] }) // and its rating and bookmark def b ... def r ... }) } Nested asynchronous calls that return more Observables. 115 Within the flatMap “transformation” function we perform nested asynchronous calls that return more Observables. -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> // for each video we want to fetch metadata def m = video.getMetadata() .map({ Map<String, String> md -‐> // transform to the data and format we want return [title: md.get("title"), length: md.get("duration")] }) // and its rating and bookmark def b ... def r ... }) } Nested asynchronous calls that return more Observables. 116 This call returns an Observable<VideoMetadata>. -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> // for each video we want to fetch metadata def m = video.getMetadata() .map({ Map<String, String> md -‐> // transform to the data and format we want return [title: md.get("title"), length: md.get("duration")] }) // and its rating and bookmark def b ... def r ... }) } Observable<VideoMetadata> Observable<VideoBookmark> Observable<VideoRating> 117 3 separate types are being fetched asynchronously and each return an Observable. -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> // for each video we want to fetch metadata def m = video.getMetadata() .map({ Map<String, String> md -‐> // transform to the data and format we want return [title: md.get("title"), length: md.get("duration")] }) // and its rating and bookmark def b ... def r ... }) } Each Observable transforms its data using ‘map’ 118 Each of the 3 different Observables are transformed using ‘map’, in this case from the VideoMetadata type into a dictionary of key/value pairs. -
For each of the 10 Video objects it transforms via
‘mapMany’ function that does nested async calls. 119 -
For each Video ‘v’ it calls getMetadata() which returns Observable<VideoMetadata>
These nested async requests return Observables that emit 1 value. 120 -
The Observable<VideoMetadata> is transformed via a ‘map’ function to return
a Map of key/values. 121 -
Same for Observable<VideoBookmark> and Observable<VideoRating> 122 Each of the .map()
calls emits the same type (represented as an orange circle) since we want to combine them later into a single dictionary (Map). -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> // for each video we want to fetch metadata def m = video.getMetadata() .map({ Map<String, String> md -‐> // transform to the data and format we want return [title: md.get("title"), length: md.get("duration")] }) // and its rating and bookmark def b ... def r ... // compose these together }) } 123 -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> def m ... def b ... def r ... // compose these together }) } 124 At this point we have 3 Observables defined but they are dangling - nothing combines or references them and we aren’t yet returning anything from the ‘flatMap’ function so we want to compose m, b, and r together and return a single asynchronous Observable representing the composed work being done on those 3. -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> def m ... def b ... def r ... // compose these together return Observable.zip(m, b, r, { metadata, bookmark, rating -‐> // now transform to complete dictionary // of data we want for each Video return [id: video.videoId] << metadata << bookmark << rating }) }) } 125 -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> def m ... def b ... def r ... // compose these together return Observable.zip(m, b, r, { metadata, bookmark, rating -‐> // now transform to complete dictionary // of data we want for each Video return [id: video.videoId] << metadata << bookmark << rating }) }) } The ‘zip’ operator combines the 3 asynchronous Observables into 1 126 We use ‘zip’ to combine the 3 together and apply a function to transform them into a single combined format that we want, in this case a dictionary that contains the key values pairs from the dictionaries emitted by ‘metadata’, ‘bookmark’, and ‘ratings’ along with the videoId also available within scope of the flatMap function and ‘closed over’ by the closure being executed in ‘zip’. -
Observable.zip(a, b, { a, b, -‐>
... operate on values from both a & b ... return [a, b]; // i.e. return tuple }) 127 -
Observable.zip(a, b, { a, b, -‐>
... operate on values from both a & b ... return [a, b]; // i.e. return tuple }) 128 -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> def m ... def b ... def r ... // compose these together return Observable.zip(m, b, r, { metadata, bookmark, rating -‐> // now transform to complete dictionary // of data we want for each Video return [id: video.videoId] << metadata << bookmark << rating }) }) } return a single Map (dictionary) of transformed and combined data from 4 asynchronous calls 129 -
def Observable<Map> getVideos(userId) { return VideoService.getVideos(userId)
// we only want the first 10 of each list .take(10) .flatMap({ Video video -‐> def m ... def b ... def r ... // compose these together return Observable.zip(m, b, r, { metadata, bookmark, rating -‐> // now transform to complete dictionary // of data we want for each Video return [id: video.videoId] << metadata << bookmark << rating }) }) } return a single Map (dictionary) of transformed and combined data from 4 asynchronous calls 130 The entire composed Observable emits 10 Maps (dictionaries) of key/value pairs for each of the 10 VIdeo objects it receives. -
The ‘mapped’ Observables are combined with a ‘zip’ function that
emits a Map (dictionary) with all data. 131 The entire composed Observable emits 10 Maps (dictionaries) of key/value pairs for each of the 10 VIdeo objects it receives. -
The full sequence emits Observable<Map> that emits a Map (dictionary)
for each of 10 Videos. 132 -
interactions with the API are asynchronous and Declarative. API implementation
controls Concurrency Behavior. 133 -
/ps3/home Dependency F 10 Threads Dependency G 10 Threads Dependency
H 10 Threads Dependency I 5 Threads Dependency J 8 Threads Dependency A 10 Threads Dependency B 8 Threads Dependency C 10 Threads Dependency D 15 Threads Dependency E 5 Threads Dependency K 15 Threads Dependency L 4 Threads Dependency M 5 Threads Dependency N 10 Threads Dependency O 10 Threads Dependency P 10 Threads Dependency Q 8 Threads Dependency R 10 Threads Dependency S 8 Threads Dependency T 10 Threads /android/home /tv/home Functional Reactive Dynamic Endpoints Asynchronous Java API 134 We have found Rx to be a good fit for creating Observable APIs and composing asynchronous data together while building web services using this approach. -
/ps3/home Dependency F 10 Threads Dependency G 10 Threads Dependency
H 10 Threads Dependency I 5 Threads Dependency J 8 Threads Dependency A 10 Threads Dependency B 8 Threads Dependency C 10 Threads Dependency D 15 Threads Dependency E 5 Threads Dependency K 15 Threads Dependency L 4 Threads Dependency M 5 Threads Dependency N 10 Threads Dependency O 10 Threads Dependency P 10 Threads Dependency Q 8 Threads Dependency R 10 Threads Dependency S 8 Threads Dependency T 10 Threads /android/home /tv/home Functional Reactive Dynamic Endpoints Asynchronous Java API Hystrix fault-isolation layer 135 With the success of Rx at the top layer of our stack we’re now finding other areas where we want this programming model applied. -
+ Observable<User> u = new GetUserCommand(id).observe(); Observable<Geo> g = new
GetGeoCommand(request).observe(); Observable.zip(u, g, {user, geo -‐> return [username: user.getUsername(), currentLocation: geo.getCounty()] }) RxJava coming to Hystrix https://github.com/Netflix/Hystrix 136 One example of us pushing Rx deeper into our stack is the addition of support for RxJava to Hystrix version 1.3 (being tested in production as of July 2013). See https://github.com/Netflix/ Hystrix/issues/123. -
Observable APIs 137 Looking back, Rx has enabled us to
achieve our goals that started us down this path. -
Lessons Learned Developer Training & Documentation 138 As we implemented
and adopted Rx and enabled dozens of developers (most of them of either Javascript or imperative Java backgrounds) we found that workshops, training sessions and well-written documentation was very helpful in “onboarding” them to the new approach. We have found it generally takes a few weeks to get adjusted to the style. -
Developer Training & Documentation Lessons Learned Debugging and Tracing 139
Asynchronous code is challenging to debug. Improving our ability to debug, trace and visualize Rx “call graphs” is an area we are exploring. -
Developer Training & Documentation Lessons Learned Debugging and Tracing Only
“rule” has been “don’t mutate state outside of function” 140 Generally the model has been self-governing (get the code working and all is fine) but there has been one principle to teach since we are using this approach in mutable, imperative languages - don’t mutate state outside the lambda/closure/function. -
Function Reactive FunctionAL Lambdas Closures (mostly) Pure Composable Asynchronous Push
Events Values 141 The Rx “functional reactive” approach is a powerful and straight-forward abstraction for asynchronously composing values and events and has worked well for the Netflix API. -
Functional Reactive in the Netflix API with RxJava http://techblog.netflix.com/2013/02/rxjava-netflix-api.html Optimizing
the Netflix API http://techblog.netflix.com/2013/01/optimizing-netflix-api.html RxJava https://github.com/Netflix/RxJava @RxJava Ben Christensen @benjchristensen http://www.linkedin.com/in/benjchristensen 142