Upgrade to Pro — share decks privately, control downloads, hide ads and more …

Matthias Bussonnier, Min Ragan-Kelley, M Pacer,...

Matthias Bussonnier, Min Ragan-Kelley, M Pacer, Thomas Kluyver - Ending Py2/Py3 compatibility in a user friendly manner

> "Four shalt thou not count, neither count thou two, excepting that thou
then proceed to three."

>> Monty Python and the Holy Grail; Scene 33

Python 3 has been around for more than eight years, and much of the Python
ecosystem is now available both on Python 2 and Python 3, often using a single
code base. Nonetheless, this compatibility comes at a development cost and some
library authors are considering ending support for Python 2 . These
once-python-2-compatible libraries are at risk of being upgraded on non
compatible system and cause user (and developer) frustration.

While it may seem simple to cease support for Python 2, the challenge is not in
ending support, but doing so in a way that does not wreak havoc for users who
stay on Python 2. And that is not only a communications problem, but a
technical one : up until recently, it was impossible to tag a release as Python
3 only; today it is possible.

Like any maintainer of a widely used library, we want to ensure that users
continue to use Python 2 continue to have functioning libraries, even after
development proceeds in a way that does not support Python 2.

One approach is to ensure easy installation of older versions if possible avoid
incompatible versions altogether. Users should not need to manually pin maximal
version dependencies across their development environments and projects if all
they want is to use the latest versions of libraries that are compatible with
their system.

Even if we did expect that of users, consider what would happen when a package
they rely on converts to be only Python 3 compatible. If they were not tracking
the complete dependency tree, they might discover, on upgrade, that their
projects no longer work. To avert this they would need to pin those at the last
version compatible with Python 2. Users that want to use older python versions
should not have to go through so much anguish to do so.

In order to solve this problem, and thereby make both users' and maintainers'
lives easier, we ventured into the rabbit-hole called Packaging.

Though we set off with a singular quest, our tale roves through many lands.
We'll narrate the story of our amending PEPs, our efforts in building the
ramparts of the pypa/Warehouse Castle, battles with the dragons of Pip, and
errands in the "land of no unit tests" otherwise known as PyPI legacy.

By the end of the above tale, the audience members will know the road to Python
3 only libraries had once had hazards that are now easily avoidable. So long as
users upgrade their package management tools.

https://us.pycon.org/2017/schedule/presentation/319/

PyCon 2017

May 21, 2017
Tweet

More Decks by PyCon 2017

Other Decks in Programming

Transcript

  1. Building Bridges, not walls Ending Python2 compatibility in a user

    friendly manner M Bussonnier & M Pacer Slides available at https://short.url
  2. About us We have been working on the IPython and

    Jupyter projects for 5 and ~1 year. github:@Carreau/twitter:@Mbussonn github:@mpacer/twitter:@mdpacer
  3. What this talk is not about Is Python 2 or

    3 the right choice? Should I migrate to Python3-only?
  4. What this talk is about We migrated IPython to Python

    3 only. We care about all of our users, Python 2 and 3 alike. We want to make the transition the least frustrating for users and dev. We'll be describing how we did this.
  5. Python 2 vs 3 is an example The lessons we've

    learned are not specific a python2 to python3 transition. Our talk applies to stopping support for any version (e.g., 2.6 or 3.3).
  6. Python 3 Statement List of who is stopping Python 2

    support when. Resources on how to stop support with minimal frustration for users www.python3statement.org
  7. Scratch your own itch We released IPython 6, the code

    base is Python 3 only. IPython 5 will still be stable (LTS). So if a Python 2 user runs it should install the latest version of IPython 5, not IPython 6! $ pip install ipython -U
  8. Core of the problem $ pip install ipython --upgrade Installing

    ipython... doing magic... success $ python >>> import IPython SyntaxWarningErrorError("I Just don't like you.")
  9. Users do not always read documentation before installing. Scripts do

    not read documentation before installing. Users/scripts do not read error messages. dependencies – all packages need update to have conditional dependencies.
  10. Rename ? That's going to be confusing and void most

    of the documentation on the Internet. Import names different from package name is also a bit tricky to explain sometime.
  11. Use a metapackage Use a package with virtually no-code that

    have conditional dependencies, and move the "real" code to a sub package. You kinda need to re-release old code (can't requires old-yourself) pip upgrade metapackage will not pull core unless pinned deps
  12. use a pip bug "Hidden Feature": # somewhere in pip

    _py_version_re = re.compile(r'-py([123]\.?[0-9]?)$') # somewhere else if is_tar_gz(file): match = self._py_version_re.search(version) if match: version = version[:match.start()] py_version = match.group(1) if py_version != sys.version[:3]: self._log_skipped_link( link, 'Python version is incorrect') return
  13. use a pip bug "Hidden Feature": You can publish ipython-py3.3.tar.gz

    and ipython-py3.4.tar.gz and ipython-py3.5.tar.gz and ipython-py3.6.tar.gz and ipython- py3.7.tar.gz to be future proof. But it does not work beyond Python 3.9...
  14. As Raymond Hettinger would say if he is in the

    room There must be a better way !
  15. The new* way: Python- Requires Since December with pip 9.0.1,

    and setuptools 24.3: Use pip install and it will adhere to python_requires. N.B.: Do not invoke setup.py directly! # setup.py setup(..., python_requires='>=3.4' )
  16. python_requires metadata comes from , 2005. But for 11 years

    nothing implemented or understood it. pep 345
  17. setuptools >= 24.3 The python_requires keyword in known only by

    setuptools versions > 24.3. Required to build the sdist/wheel and publish the package Required to install from sdist.
  18. pip >= 9.0.1 From PyPI: Versions of pip < 9

    ignore data-requires-python attributes. This will result in installing incompatible versions.
  19. Defensive packaging 1. Update your documentation and scripts to use

    pip. 2. Keep setup.py and __init__.py python 2 compatible, but have them err early. 3. For clear error messages in complicated situations, use multiple lines.
  20. Direct users to pip install Update your documentation and scripts

    to use pip install [-e] .. Reiteration: Do not use python setup.py <…>; it ignores requires_python.
  21. Keep setup.py python 2 compatible. If installation fails before setup(),

    the most probable reason: pip < 9. Catch this, and don't let installation finish! Instead: explicitly ask users to update pip.
  22. E.g.,: in setup.py, before setup(): if sys.version_info < (3, 3):

    error = """ IPython 6.0+ does not support Python 2.6, 2.7, 3.0, 3.1, or 3.2. Beginning with IPython 6.0, Python 3.3 and above is required. This may be due to an out of date pip. Make sure you have pip >= 9.0.1. """ sys.exit(error)
  23. Keep __init__.py python 2 compatible Users will still find ways

    to avoid pip and setup.py. e.g.: $ pip install -e . $ ... $ git pull # update without install
  24. E.g., in __init__.py before module imports: import sys if sys.version_info

    < (3,3): raise ImportError( """ IPython 6.0+ does not support Python 2.6, 2.7, 3.0, 3.1, or 3.2. Beginning with IPython 6.0, Python 3.3 and above is required. See IPython `README.rst` file for more information: https://github.com/ipython/ipython/blob/master/README """)
  25. Results IPython 6.0, #downloads: First Week: Pip 9 - Python

    3 : 45 586 Pip 8 - Python 2 : 92 386 > 2×, not good Second Week: Pip 9 - Python 3 : 48 389 Pip 8 - Python 2 : 13 293 > 0.25 ×, still not great, but better!
  26. Bug reports / complaints Two. During RC: python setup.py install

    got 6.0 on Python 2 – now documented. "My Bad I did not read the error message"
  27. The old PEP PEP 345 Requires-Python =============== This field specifies

    the Python version(s) that the distribution is guaranteed to be compatible with. Version numbers must be in the format specified in Version Specifiers. Examples: Requires-Python: 2.5 Requires-Python: >2.1 Requires-Python: >=2.3.4 Requires-Python: >=2.5,<2.7
  28. Setuptools As of , your setup() call follows the python_requires

    keyword when building a package from source. Kudos to @xavfernandez for making that possible. setuptools 24.2
  29. Pypi Pip should get Require-Python info before downloading the sdist.

    Pip does that by checking the /simple/ repository url:
  30. view-source:https://pypi.python.org/simple/pip/ <!DOCTYPE html><html><head><title>Links for pip</title></ <a href="…/pip-1.3.tar.gz" >pip-1.3.tar.gz</a><br/> <a href="…/pip-8.0.0-py2.py3-none-any.whl"

    >pip-8.0.0-py2 <a href="…/pip-6.0.4.tar.gz" >pip-6.0.4.tar.gz</a><br/> <a href="…/pip-0.3.1.tar.gz" >pip-0.3.1.tar.gz</a><br/> <a href="…/pip-1.0.1.tar.gz" >pip-1.0.1.tar.gz</a><br/> <a data-requires-python="&gt;=2.6,!=3.0.*" href="…/pip-9. <a href="…/pip-1.0.2.tar.gz" >pip-1.0.2.tar.gz</a><br/> <a href="…/pip-0.3.tar.gz" >pip-0.3.tar.gz</a><br/> <a href="…/pip-0.8.2.tar.gz" >pip-0.8.2.tar.gz</a><br/> <a href="…/pip-0.2.1.tar.gz" >pip-0.2.1.tar.gz</a><br/> ⋮
  31. This lists files and now have data-requires-python with version specifications

    for each file. This was done by amending . N.B.: If you are running (or maintain) a PyPI proxy please make sure it surfaces new data-requires-python. PEP 503
  32. Pip Pip 9+ checks data-requires-python. In the same place that

    pip process the wheel filenames (to get -py2 , -py3 suffixes) and filter "compatible" files. That's the main reason you want final users to upgrade to pip 9+ if you are not on pip 9+, pip will consider incompatible packages, download them and ... fail at some point. https://github.com/pypa/pip/pull/3877
  33. Patching PyPI & Warehouse: PyPI-legacy You likely know PyPI-legacy, that's

    usually where most people download their packages from when then pip install. But PyPI is old, its testing is sparse, and its documentation is not always accurate. It's not easy to run PyPI locally.
  34. Patching PyPI & Warehouse: Warehouse The PyPA stated developing Warehouse

    (the new, improved PyPI) with 100% test coverage and solid documentation. It even has a one liner to run it locally using Docker!
  35. Patching PyPI & Warehouse: Postgres PyPI and warehouse are connected

    to the same Postgres database. So any updates need to be coördinated between them.
  36. Tying it together It seems like it should be straightforward…

    When you need the /simple/<package> webpage, the sql query should simply be: Parse that, build a list of hrefs and data-requires-python values, and you're done. Right? SELECT * from release_files where package_name=package
  37. Patching PyPI & Warehouse: dancing between tables PEP 345 specifies

    that requires-python is an attribute on releases, not release files. On the one hand, that makes sense: we distribute files, which make up releases. On the other hand, the simple implementation won't work: release files are specified in the release_files table releases are specified in the releases table
  38. Patching PyPI & Warehouse: dancing between tables In theory, we

    could use a JOIN on the two tables. Except, with the number of available packages, a JOIN is too slow. At the same time, we cannot safely refactor the database because PyPI-legacy is not well tested.
  39. Solution: Triggers The JOIN was doing too much work; it'd

    be better if we could update only the necessary rows. Triggers solve exactly that problem. We use a trigger to update the release_files table when it or releases are updated (or a row is inserted in either table). Detail: UPSERT is a combination of update and insert, greatly simplifying the logic.
  40. On IPython IPython 6+ is Python3 only We're still updating

    the IPython 5.x – Python 2 LTS branch Transition has gone relatively well for IPython! It will only get easier!
  41. On switching your package to Python3 only upgrade setuptools use

    pip 9+, encourage your users to do the same fix your documentation (use pip, not setup.py!) catch early in py2 compatible __init__.py and setup.py Read and contribute to python3statement practicalities section questions, gotchas, &c.
  42. On contributing to packaging infrastructure We've improved the documentation of

    both warehouse and PyPI, to make new contributions easier. You should contribute — there's tonnes of low hanging fruit! Add tests, clean up the codebase, or bring features from PyPI to Warehouse.