rooflight for installation. Check for any damage upon delivery. 2. Check that the upstand is the correct size and is constructed correctly. 3. Clean and dry upstand so that the sealant can adhere properly for weather sealing. 4. Check that the upstand is level and square using packers where needed so the correct level is achieved all the way around. 5. Carefully unpackage the corner protectors on the Frameless Pyramid/Lantern. Tools Required: Silicone Gun Stanley Knife Compatible Sealant Cordless screwdriver Screws Level Packers 102-120 North Lane, Aldershot GU12 4QN Tel: 01252 336614 E: [email protected] W: www.glassroofsuk.com Fitting Guide
[email protected] W: www.glassroofsuk.com 9. Screw the Frameless Lantern down through the holes provided, making sure not to over tighten screws. 10. Repeat this process round the perimeter of the internal Frameless Lantern. Making sure all screw holes are screwed down correctly. You have now succesfully installed your Frameless Roof Lantern / Pyramid. 6. Apply a 10mm high bead of compatible sealant to the top edge of the upstand all the way around. 7. Carefully lower the Lantern/ Pyramid into position pressing down firmly for a tight seal. 8. Carefully remove glass protection film. Fitting Guide
seofreelancerlondon
chrislema
jrom
notwaldorf
mclloyd
lemiorhan
reverentgeek
denniskardys
deanohume
ddemaree
bcantrill
mojombo
mza
