Upgrade to Pro — share decks privately, control downloads, hide ads and more …

A Brief Guide to Writing Synchrotron User Propo...

Bruce Ravel
June 15, 2017

A Brief Guide to Writing Synchrotron User Proposals for XAFS

Bruce Ravel

June 15, 2017
Tweet

More Decks by Bruce Ravel

Other Decks in Science

Transcript

  1. Writing General User Proposals A Brief Guide to Writing Synchrotron

    User Proposals for XAFS Bruce Ravel Synchrotron Science Group, Materials Measurement Laboratory National Institute of Standards and Technology inspired by a talk by Matthew Newville The Consortium for Advanced Radiation Sources University of Chicago 15 June, 2017 1 / 8 Writing User Proposals
  2. Writing General User Proposals General User Access to Synchrotrons Beamlines

    tend to give at least 25% of the beamtime – often much more – for General Users, i.e. open access to any researcher: Beamtime allocated by peer-review and open competition. The process is designed to bring in new people, while keeping access open to all researchers. General User Beamtime can go to “local experts” Many beamlines give much more than 50% General User time Synchrotron calendars include “run cyles” with specific deadlines for proposal submission. Always check the synchrotron website for the submission calendar. Proposals are usually due around the middle of the preceding run. 2 / 8 Writing User Proposals
  3. Writing General User Proposals Example: XAFS Beamlines at the Advanced

    Photon Source in the U.S. Beamline % GUP % XAFS Notes 2-ID (XOR) > 50% 1/4 x-ray microprobe, XANES 4-ID (XOR) > 50% 1/2 XMCD, magnetic XAFS 5-BM (DNDCAT) = 25% 1/2 catalysis, enviro 9-BM (XOR) > 50% all can do S and Cl! 10-ID (MRCAT) = 25% most Catalysis, enviro, actinides. 11-ID (XOR) = 25% some time-resolved. 12-BM (XOR) > 50% most Catalysis, enviro, actinides. 13-BM (GSECARS) > 50% 1/4 geo / enviro 13-ID (GSECARS) > 50% 1/4 x-ray microprobe, geo / enviro 18-ID (BioCAT) = 25% some biological systems 20-BM (XOR/PNC) > 50% all general purpose XAFS 20-ID (XOR/PNC) > 50% most x-ray microprobe, geo / enviro, time-resolved. CAT A beamline operated by an outside team XOR A beamline operated by the APS 3 / 8 Writing User Proposals
  4. Writing General User Proposals Finding the right XAFS beamline The

    IUCr XAFS Commission maintains a lovely compilation of the world’s beamlines. (Thanks to Giuliana Aquilanti and Masao Tabuchi!) https://www.iucr.org/resources/commissions/xafs 4 / 8 Writing User Proposals
  5. Writing General User Proposals Proposal Contents The bottom line Will

    this experiment result in a publication? At most synchrotrons, the proposals are rated by panels of volunteers who may read as many as 20-30 proposals at a time. (The workload varies by synchrotron, but assume your reader is an over-worked volunteer and a peer.) Key Points for Successful Beamtime Proposals: 2-3 pages: Take the time to make it short Describe the importance of your science in terms any scientist can understand Aim broadly, proposals are read by physicists, chemists, biologists, etc.... Describe your experiment well. Include details of samples to be measured and of experimental setup if non-standard. Account for the time you request and make clear that the time will be well-used. Consult with a beamline scientist and/or your collaborators before submitting proposal. 5 / 8 Writing User Proposals
  6. Writing General User Proposals More hints on proposal writing Describe

    the “Societal Impact” in the Abstract – reviewers love this. Describe other measurements that have been made on these samples. Be specific and explicit about: Element(s) and edge(s) to be studied Concentrations of elements to be studied. Transmission, fluorescence, multi-element detector Give literature references. (Don’t attach your CV. Don’t attach PDFs of published papers.) Say you’ve taken this or a similar training class! (Really!) If you’re a student or postdoc (most reviewers love this, too): say so. list yourself as Spokesperson, not your advisor. write the proposal yourself, with help from advisor / senior students. If you’ve had some beamtime and “need a bit more time”, include a plot of any data collected so far. List a 2nd choice beamline. 6 / 8 Writing User Proposals
  7. Writing General User Proposals Proposal Scoring, Lifetime and Aging Proposal

    Scores Many sycnhrotrons use a system of 1 (best) to 5 (worst) – like golf! Proposal Shifts number of 8-hour shifts required for next run and for the lifetime of the proposal The synchrotron usually published the average Score for successful proposals Proposals that don’t get time often “age up” as a reward for patience Proposals usually live for up to 2 years or until the allocated shifts are used To get beamtime in more than 1 run for a proposal, you will make a “Beamtime Request” for time in later cycles – not a new proposal To continue work, you can copy-and-paste an old proposal to start a “new” proposal Caution! The aging systems at different synchrotrons work differently. Check each synchrotron’s web site for details. 7 / 8 Writing User Proposals
  8. Writing General User Proposals After you’ve submitted a proposal Most

    beamlines are oversubscribed – many by 2× to 3×. oversubscription = (requested days ) / (available days) It may take one or more run cycles to get beamtime. You may get less time than you ask for. – it will become easier. Once you are in the system, everyone involved wants you to succeed (i.e. publish!). Most of these hints work for getting beamtime at other facilities and for other techniques. 8 / 8 Writing User Proposals