Upgrade to Pro — share decks privately, control downloads, hide ads and more …

PiHome – home automation done with Raspberry PI...

PiHome – home automation done with Raspberry PI and Python

Lightning talk on my pet project used as a "smart home" for my private purposes.

Wojciech Sznapka

May 26, 2017
Tweet

More Decks by Wojciech Sznapka

Other Decks in Technology

Transcript

  1. PiHome – home automation done with Raspberry PI and Python

    Wojciech Sznapka Head of Development @ XCaliber Poland Twitter: @sznapka PySilesia #5/2017, Katowice
  2. Features • Steering (switches): – Floor heating steering (on /

    off / delayed) – Hot water pump steering – Lights – Window blinds – Garage gate – Main entrance gate • Scheduling: – Define schedules for any switch (with delay), eg. blinds up every 6AM • Sensors: – Current temperature – Charts • History: – Switches state – Temperatures
  3. Hardware • Raspberry PI B • Switches module (230V) controlled

    via Ethernet (ready- made board) • Switches module RM8 5V controlled via GPIO • 12V relays for switching 230V in window blinds • Dallas ds18b20 one wire temperature sensors • Bread-board and bunch of wires
  4. Software • Raspbian – with GPIO modules – Supervisord –

    Apache + WSGI • Pihome-api – Python – REST API built with Flask – Python-crontab • PiHome – AngularJS as a SPA frontend – Twitter Bootstrap – optimized for mobile • CLI tasks – Queue consumers – Celery tasks
  5. Software • RabbitMQ – relay “store” requests (failover) • Celery

    - “delayed” on / off • MongoDB – history of sensors and switches • Memcached – cache switches status • Crontab module to setup schedule (via internal curl to API)
  6. Lesson learned • Don't rely much on WiFi (have fallback

    / queue) • Don't play around with higher voltages unless you're pretty sure what're you doing... • Be prepared for frequent and random restarts (and SD cards failures…) • Don’t use GPIO pins which have different initial (on boot) state than you like to use with your peripheral device • There plenty of ready made components, soldering is often last thing, if you want to get things fast